Watches are accessories that can say a lot about the man or woman who wears them. They are often considered elegant and sometimes expensive, present. It is not uncommon to have a watch for many years if you take care of it. In any case, the time will come sooner or later when you have to repair the battery of your watch to make it work. Fortunately, you can always repair your watch stack and keep your time piece late in the future.
Instructions
Look at the case with the back of Snap-On
• Place a cloth on a table and place the watch face down on the top of the fabric. Immobilize the watch with pliers.
• Insert the flat blade between the bottom of the case and the case and pry until you remove the case back from the case of the watch.
• Identify the battery inside the watch case and gently insert the flat-blade watch fixing kit into the case and lift the battery loses to remove it from the case of the watch. Insert a new battery instead of the one you just removed.
• Return the back box to its original position. Make sure that the sealing rubber, if any, is properly aligned before closing the case. Squeeze the perimeter to break the back in place. Use a soft cloth to clean any dirt and fingerprints from the watch and reset this watch.
Watch Housings with Screw Type Back
• Place a cloth on a table and place the watch face down on the top of the fabric. Immobilize the watch with pliers.
• Remove the watch clip. Locate the pinhead on the edge of the band that connects it to the loop. Insert a pointed object into the pinhead hole and press firmly to pull it out. Separate the band from the watch.
• Align the metal tips of the case key with the notches on the back of the watch. Unscrew the back cover that covers the battery by turning the key counterclockwise. Insert a flat edge screwdriver into the case and lift the battery loses to remove it from the case of the watch. Insert a new battery instead of the one you just removed.
• Close the back. Make sure that the back of the case is aligned with the watch case and the rear screw in place with your watch tool kit. Use your fingers to turn your back. Finish the job using a case key for the tender snuggly.
• Use a soft cloth to clean the dirt from the watch's fingerprints and reset this watch.

