How to Fix Your Quartz Watch

Flip the face of the quartz watch in the palm of your hand. Wedge a knife from watch fixing kit between the box and back cover with a look at downward pressure and push down. The case is opened and the internal clock is exposed. If your watch has a box of screws, cover the box with a bottle opener rubber grip. With the palm of your hand, turn the cause to the left until it disengages from the box.

Use tongs to ward off the locking bar that keeps the battery in its holder. Some still may have a small screw from watch repair tool kits to secure the bar. Loosen but do not remove, push the bar aside. The battery is a small round silver disc placed between two metal parts that hold elliptical. Take the battery using tweezers and remove the bracket. Do not touch the inside of the box with your fingers. body oils can contaminate electronic components.

Connect the clip to a voltage meter to determine if the battery has a charge. The battery in the car necklace watch is charged when the needle is in the green zone. If the battery is charged and the clock is not running, an essential component of electronics is not working properly and requires repair expert. The battery is weak and must be replaced if it is in the yellow zone. The battery is dead and must be replaced if the needle is in the red zone. Some meters have a numeric digital display with a graph to interpret the numbers on the back. See garages have a battery meter.

Use a lens brush, which can be squeezed to force air from the flask, slowly away to remove dust and dirt of the internal mechanism globe. Do not use the wind to blow dust. Moisture from breathing can cause corrosion or affect the components.

Replace the battery if it is dead. Using tongs, place the new battery in the holder. Return the locking bar at the top of the battery to hold it in position. Use a screwdriver to set the bar in the position, if necessary. Remove the old rubber seal in the case and replace it with a new one.

Snap the cause with the thumb and index finger or screw clockwise until it is in hand.

Set the time pulling the crown, which is the spin button at 3, and the movement of the hands.